First-rate Linearity

The built-in high precision Hall sensor combined with the high precision and balanced rotor will guarantee remarkable linearity of the motor.

Super Lightweight

The G3 Modified & Stock motors only weigh 161g and 132g respectively; the weights are reduced by about 11% & 21%
when comparing with the V10 G2 motor. With the light weights, drivers can easily adjust the balance of their vehicles.

Asymmetric Bearings

By comparison (with the V10 G2 motor), for improving the load-carrying capacity, the size of the front bearing of the G3 motor is increased by 26% ; while for lower resistance, the size of the rear bearing is reduced by 6%. The asymmetric bearing design will make the motor running more stable and smooth.

Great Heat Dissipation

The special shell design which makes the stator core (/laminations) expose to the air will maximize cooling, the big holes(*) on the front & rear end plates will guarantee outstanding heat dissipation of the motor. (*Note: the 5.5T~8.5T motors are mainly adopted by off-road vehicles, so the factory default end plates for those motors are the ones with small holes.)

Stepless Adjustable Mechanical Timing

The mechanical timing can be adjusted finely and smoothly; the skid-proof lines
at the rear end of the motor will guarantee stability of the timing after adjustment

Re-buildable Structure

The detachable structure design for regular cleaning & maintenance will effectively prolong the service life of the motor and retain its efficiency.

Two Different End Plates

The end plates with big holes adopted by the 3.5T~5.0T & 10.5T~21.5T motors will guarantee excellent heat dissipation of the motor for on-road applications. The end plates with small holes used by the 5.5T~8.5T motors will effectively prevent sand or dirt from getting inside and damaging the motor for off-road applications. Users can purchase and mount the end plates with big or small holes as per actual needs.

High-quality Components

The use of high-performance stator core (/laminations), heat(200?)-resistant pure copper wire, heat(200?)-resistant
rotor with strong structure, international top brand high-precision and high strength bearings, and copper solder tabs with super current endurance will guarantee excellent performance and great durability.

BRCA/EFRA Approved

Specifications

Type

Scale - 1/10th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Pole Count - 2

Relevant Parameters

KV Rating - 4500
LiPo Cells - 2-3S
No-load Current(A) - 5.5
Max. Power Output(W) - 260
Amp at the Max. Power Output(A) - 74

Size & Weight

O.D.(mm) - 35.9(1.41in)
Length (mm) - 50.5 (1.99in)
Shaft Diameter (mm) - 3.17 (0.125in)
Shaft Length (mm) - 14(0.55in)
Weight (g) - 133 (5.75oz)
Front Bearing - D9*D4*t4
Rear Bearing - D8*D3*t4

Other Parameters

Stock Rotor - 7.3-12-u
Timing - 20-50 Degrees(Adjustable)
Applications - 1/10th Drift, Stock Class of 1/10th

Product information

Brand
Hobbywing
Product type
Hobbywing
SKU / part number
hw30401112
Availability
In stock

Hobbywing

XERUN-V10-10.5T-Black-G3-BL-Motor

SKU hw30401112
£94.99
£94.99
RC specialist helpCompatibility advice before you order
Free UK delivery £75+Delivery options shown at checkout
Secure checkoutTrusted payment methods available

Delivery information

Delivery options and costs are shown at checkout. Contact us before ordering if you need an item urgently.

Returns & exchanges

Changed your mind or ordered the wrong part? Contact our team and we will help with the next step.

Need compatibility help?

Send us your model and part number before ordering if you are unsure. We would rather help you get the correct item first time.

First-rate Linearity

The built-in high precision Hall sensor combined with the high precision and balanced rotor will guarantee remarkable linearity of the motor.

Super Lightweight

The G3 Modified & Stock motors only weigh 161g and 132g respectively; the weights are reduced by about 11% & 21%
when comparing with the V10 G2 motor. With the light weights, drivers can easily adjust the balance of their vehicles.

Asymmetric Bearings

By comparison (with the V10 G2 motor), for improving the load-carrying capacity, the size of the front bearing of the G3 motor is increased by 26% ; while for lower resistance, the size of the rear bearing is reduced by 6%. The asymmetric bearing design will make the motor running more stable and smooth.

Great Heat Dissipation

The special shell design which makes the stator core (/laminations) expose to the air will maximize cooling, the big holes(*) on the front & rear end plates will guarantee outstanding heat dissipation of the motor. (*Note: the 5.5T~8.5T motors are mainly adopted by off-road vehicles, so the factory default end plates for those motors are the ones with small holes.)

Stepless Adjustable Mechanical Timing

The mechanical timing can be adjusted finely and smoothly; the skid-proof lines
at the rear end of the motor will guarantee stability of the timing after adjustment

Re-buildable Structure

The detachable structure design for regular cleaning & maintenance will effectively prolong the service life of the motor and retain its efficiency.

Two Different End Plates

The end plates with big holes adopted by the 3.5T~5.0T & 10.5T~21.5T motors will guarantee excellent heat dissipation of the motor for on-road applications. The end plates with small holes used by the 5.5T~8.5T motors will effectively prevent sand or dirt from getting inside and damaging the motor for off-road applications. Users can purchase and mount the end plates with big or small holes as per actual needs.

High-quality Components

The use of high-performance stator core (/laminations), heat(200?)-resistant pure copper wire, heat(200?)-resistant
rotor with strong structure, international top brand high-precision and high strength bearings, and copper solder tabs with super current endurance will guarantee excellent performance and great durability.

BRCA/EFRA Approved

Specifications

Type

Scale - 1/10th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Pole Count - 2

Relevant Parameters

KV Rating - 4500
LiPo Cells - 2-3S
No-load Current(A) - 5.5
Max. Power Output(W) - 260
Amp at the Max. Power Output(A) - 74

Size & Weight

O.D.(mm) - 35.9(1.41in)
Length (mm) - 50.5 (1.99in)
Shaft Diameter (mm) - 3.17 (0.125in)
Shaft Length (mm) - 14(0.55in)
Weight (g) - 133 (5.75oz)
Front Bearing - D9*D4*t4
Rear Bearing - D8*D3*t4

Other Parameters

Stock Rotor - 7.3-12-u
Timing - 20-50 Degrees(Adjustable)
Applications - 1/10th Drift, Stock Class of 1/10th

Product information

Brand
Hobbywing
Product type
Hobbywing
SKU / part number
hw30401112
Availability
In stock

Checked for the right fit

Compatible batteries, chargers & essentials

Recommended batteries, chargers and essentials to help you get the best from this model.

Compatible batteries, chargers & essentials

    Can’t see a compatible option? Send us the model name or part number and we’ll help you choose the correct battery, charger or spare. Ask an RC specialist →

    Customers also bought

      • RC specialist support

        Helpful advice from people who genuinely know the hobby.

      • Family-run UK store

        Independent service online and from our Gainsborough shop.

      • Buy with confidence

        Secure checkout and support before and after your purchase.